Monday, January 31, 2011

Lovers Mini Clock Scroll Saw Pattern.


The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated.Make A Donation

Sunday, January 30, 2011

Born To Ride Scroll Saw Pattern.


The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated.Make A Donation

Saturday, January 29, 2011

I Loves Me Kitty.


The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated.Make A Donation

Thursday, January 27, 2011

The Deer Hunter Mini Clock.

This will make the hunters happy. It requires a 1 7/16" mini clock insert.

I'll have to be honest here and say that I grew up a city boy. My first experience with hunting came when I was almost 30. I spent a weekend squirrel hunting and the squirrels are still laughing. Luckily I came home without without additional holes in my body and i have not been back behind a gun since.

Two hunters were walking through the woods. one of them fell down and grabbed his chest like he was in great pain. His friend had a cell phone with him and called 911. He said, I need help, i think my friend is dead. She said calm down I can help! first, make sure your friend is actually dead. The operated waited, and then heard a gun shot. He came back on the phone and said, now what?


The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated.Make A Donation

Tuesday, January 25, 2011

What time is it?

In this video I will show you a couple of reader submitted tips including how to keep time and make you scroll saw blades sticky.



The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated.Make A Donation

Monday, January 24, 2011

Tall Candle Holder Scroll Saw Pattern.

This candle holder stands almost 10 inches tall. It gets the candle up off the table making the candle stand out. It stands securely because of the three leg design minimizing the chance of tipping.

This project was made from maple for the legs and cherry for the shelf. I wanted the shelf to stand out from the legs and the cherry is still a little light but I know cherry darkens with age.

All the pieces are 1/2" thick, There are no interior cuts so it's accessible for those with pin end saws also.

This project looks simple but there are a couple things that add a bit of challenge. The curves of the legs and the circular shelf need to be cut very precisely. The eye will immediately pick out flaws in the curves. This will be good practice for cutting curves.

To cut effective circles you need to establish a pivot point with your strong hand and guide the wood with your weak hand. You will reestablish the pivot point as you go but you want a consistent and smooth turn rate.

Look at the figure below. The red ticks represent the blade from the top. When cutting pattern lines you should be able to cut inside the pattern line, split the line and cut outside the line. You need to practice until your margin of error is the width of the blade. By this I mean if you are trying to split the pattern line your cut should not vary more than an outside the line cut or inside the line cut. You don't want to see white paper between the blade and the pattern line. I know what your thinking, "That won't happen". Your probably right but make it the goal and you will improve your cutting.


That's the goal but don't beat yourself up if you miss. Luckily in the 13th century the Chinese invented a mistake eraser called sand paper. If you can fix a mistake it never happened in woodworking. For most scroll saw projects these flaws will hardly ever be noticed and you can let them go. In a project like this that is geometric in design the flaws will jump out so you need to think about precision.

Here is another tip that sounds like an insignificant detail but makes a difference. When you have legs like in a project like this slightly bevel all the feet edges of all three legs. This does a couple things. Aesthetically it adds a shadow line that separates the feet from the table which looks nicer than flat feet. The bevels also make the piece move easily over a table cloth without snagging and possible tipping over. On a small set of legs like this you can do the bevel with sand paper. On larger projects a bevel router bit works best.

The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated.Make A Donation

Sunday, January 23, 2011

Ten Minute Scroll Saw Project.

Here is a quick and dirty project you can make at craft shows just to show off your machine. This little Cube Puzzle needs no pattern and you can cut it in minutes. It's not exactly a Rubik's Cube but it's more difficult than you might think. I use basswood because it it so easy to cut but with the right blade you can cut it from any hardwood.

Prepare 1.5 x 1.5 cubes.
Draw interlocking puzzle tabs like in the picture above. Notice the faces that have the drawings and the orientation of the tabs.

Cut the first tab.
I used a clamp to cut the second tab but with a little care you can do it freehand using a good grip on the block.

Here is the puzzle disassembled.
Give the edges a little sanding and give it to the person watching.





The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated.Make A Donation

Garden Fence Topper.




Here in the US the winter storms are wreaking havoc across much of the country. We still have a ways to go but spring will come. You can paint this project and use it as a fence topper or just display it in the kitchen.

I can remember when I was very young and living with my grandmother. Every one in the town seemed to have a garden. I can't remember her ever buying vegetables. We had fresh from the garden in the summer and canned during the winter. A large part of every day was spent in the garden. I often wonder how many of us could grow our own food if we had to now.

The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated.Make A Donation

Saturday, January 22, 2011

New Sue Mey Digital Book.

Hi Guys, Sue just sent me the notice of her newest collection. This digital book looks great with loads of beautiful clocks. Think about it for a minute. Your saw is pretty much useless without patterns. The more patterns you have the more fun you are going to have with your hobby. When you buy a collection like this it gives you choices. When you can save over 80% at the same time that's all good.


The Special Offer of 50 Clock patterns in digital book format is now available:
Pay only $0.95 per pattern when you purchase this collection! Value $273.00 if purchased separately, Save $225.50 and pay only $47.50.

The selection contains an assortment of Clocks in a variety of sizes and difficulty levels. Topics include sport, animals, religious, fantasy and more. There are several decorative designs, and special occasions like Valentine’s day, Confirmation, and 21st Birthday are incorporated. Larger patterns are divided with dash lines for easy printing on standard-size paper.

Basic tips & techniques covering 15 different topics are included. There are links to pages on my website where more comprehensive information on certain topics is available. For many of the projects I have included step-by-step instructions. The patterns can be supplied in vector format on request.

Two additional images show some of the patterns in more detail.




Hug Me.


I hope everyone is ready for the weekend. I know I am. I had a pneumonia shot Thursday and the nurse said I might feel a low grade fever the next day. Well, the fever might have been low grade but the pain in every muscle in my body felt high grade. I could not raise my arms over my shoulders until tonight. Kept me out of the shop for a couple of nights but I feel 90% better now.

Tonights pattern is a small pendant cut from 1/8 inch thick maple. It has a few small cuts so you will need to move to a small blade to finish the piece. A #3 or smaller would be appropriate. You will also need a small drill bit 1/16 inch or smaller for the entry holes.



The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated.Make A Donation

Wednesday, January 19, 2011

Small Curio Shelf Scroll Saw Pattern.


I received an email the other day asking a question about a term I used in one of my videos. When I was talking about buying lumber I used the term "four quarter" 4/4. In the industry wood is sold by the board foot and thickness is referred to in quarters. For example a 1 inch board to sold as "four quarter" 4/4. A 1 and 1/2 inch thick board is "six quarter" 6/4.

I was looking around YouTube today and found a nice video produced by the Woodworkers Guild of America that discusses some other valuable terms to know when you visit the lumber yard. Keep in mind that these terms are usually not used when you shop at the big box stores like Home Depot. If you are new to shopping for lumber take a look and you will learn quite a bit.


If you are reading this in the email newsletter you may not see the video. Please visit this link and watch the video in your browser.
The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated.Make A Donation

Tuesday, January 18, 2011

Candle Sconce Scroll Saw Pattern.

I used a small tray to hold the candle on this sconce. You could substitute a wooden candle holder or just use a glass candle dish. The shelf is 2.5 inches in diameter so any thing that fits will work. All the parts are cut from 1/2" thick wood. Directions for hanging the sconce are included in the pattern.

While I was sitting at the saw tonight in my workshop a question came to my mind. Of all the different woodworking niches why did I choose the scroll saw? I have been woodworking for something like 30 years. I have made furniture, rocking horses, baby cradles. I have turned bowls, pens and made firewood on the lathe. I have spent some time with pyrography. I have taken my turn at woodcarving. I enjoyed all these different crafts but I have always come back to the scroll saw. Why?

For the last three plus years I have spent almost 100% of my time in the shop with the scroll saw. I don't think I have even turned my lathe on for at least two years. What is it about the scroll saw that keeps me interested and not burned out?

At the risk of hurting myself by thinking too much here is how I answered my question. The scroll saw is the perfect tool for the creative tinkerer. I don't consider myself a craftsman or artist. I'm a tinkerer. I love to go to the shop and just play with ideas. With a scroll saw I can have an idea and turn it into a finished piece the same day. Sometimes even the same hour. I love this instant gratification. From the time I sat down at the computer until I had today's project designed, cut, finished and photographed took me about three hours. It may not be a period replica of a Queen Anne style Highboy but I had fun making it so that's good enough for me.

The materials required for making scroll saw projects are relatively inexpensive. When I was making furniture I would spend two months of my hobby budget just buying the wood to make a desk. With the scroll saw I can often make a project with scraps in my wood bin. I'm not poor but I am cheap so this suits me just fine.

For me it just comes down to the fact that the scroll saw is a very accessible tool. It's easy to use and relatively inexpensive to operate. Many of the projects are fun to make and most people seem to enjoy what I make. It fits my personality and life style perfectly.




Never leave a burning candle unattended.
The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated.Make A Donation

Monday, January 17, 2011

Today we celebrate the birthday of Martin Luther King.

A Baptist minister, King became a civil rights activist early in his career. He led the 1955 Montgomery Bus Boycott and helped found the Southern Christian Leadership Conference in 1957, serving as its first president. King's efforts led to the 1963 March on Washington, where King delivered his "I Have a Dream" speech. There, he expanded American values to include the vision of a color blind society, and established his reputation as one of the greatest orators in American history.

In 1964, King became the youngest person to receive the Nobel Peace Prize for his work to end racial segregation and racial discrimination through civil disobedience and other nonviolent means. By the time of his death in 1968, he had refocused his efforts on ending poverty and stopping the Vietnam War.


The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated.Make A Donation

Key Hanger Scroll Saw Pattern.

This wall key hanger is very simple to make. You will need three hooks and a little scrap wood. The project is 8 inches long and 3.5 inches tall. If you need to hang more keys just extend the length and add more hooks. I did add a decorative trim around the edge with a router and part of a cove bit. I also used a keyhole router bit to add the slots on the back to hang the project on the wall. I have talked about the keyhole bit here before and they are invaluable when trying to hang a project like this. If you don't have one I recommend you look into getting one.

Hey guys I am sitting in 617 unanswered emails right now. I am trying the best I can to get to as many as possible. Please understand that I am not ignoring you it's just impossible to stay caught up. I will try my best to work on them this week. Keep sending them because I do try to read them even if I don't get a chance to answer them. Thanks.

The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated.Make A Donation

Sunday, January 16, 2011

Arrowhead Scroll Saw Patterns

Seven different arrowhead patterns. You can use these for pendants or key chains. I used one of the inlay techniques I have shown before. The inlay material is polymer clay.


In the early 1900's Richard Old built this model of the Milan Cathedral. With over 8000 pieces it took him 5 years to complete. This is just one of the 767 models he built over his lifetime. Richard lived in Middlesbrough, England. He was a cabinet maker and organ builder by trade and was a bit of a recluse devoting endless hours to intricate fretwork.

What follows is a newsreel showing a few details of this masterpiece. The quality is pretty bad but still worth watching.



The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated.Make A Donation

Saturday, January 15, 2011

Ornamental Cross Scroll Saw Pattern.


The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated.Make A Donation

Friday, January 14, 2011

300 Club Bowling Trophy


The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated.Make A Donation

Adrian Martinez: Intarsia Artist

Wednesday, January 12, 2011

Free Pattern from Sheila Landry Designs.

Sheila from Sheila Landry Designs is offering another free pattern. This beautiful Butterfly Fretwork Shelf is within the range of even the newest scrollers. If you are looking for a fun project to cut this weekend give this one a try.

If you have not had the opportunity to visit her web site do yourself a favor and go there right now. Sheila has worked night and day to upgrade her site and it has really paid off. I guarantee you will find something you cannot pass up. Her Candle Tray patterns are just outstanding. Sheila has the unique gift of designing patterns that have a broad appeal. If you make one of her patterns be ready to make several because once family and friends see it they will want one also.

Thanks again Sheila for offering all of us another great pattern.

The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated.Make A Donation

Tuesday, January 11, 2011

Shop Vac Silencer Caution.

Yesterday I ask for input about using a shop vac in an enclosure to reduce the noise. As is always the case one of my readers took the time to find the official answer.

Her is part of an email i received from Sawdust Dave.

Hi Steve,
I was also concerned about heat buildup within the motor when I watched the video that someone posted yesterday. After reading your post today I contacted Shop Vac to get info on putting the shop vac in an enclosed unit (suggested cubic feet of airspace etc) and using it for extended periods. Their response was: "they have never done any research on what would be required as far as cubic feet of air space that an enclosure should have". He would not suggest putting one in an enclosure unless one side of the enclosure is open allowing plenty of airflow. He also said that non-industrial type shopvacs have a single stage motor. Those types should never be used for 25-30 minutes at a time then be allowed to cool for 45 minutes to an hour or the motor could burn up or catch fire. Going by what the shopvac people said using an enclosure like in the video probably would be fine but not for more than a couple of minutes. I have mine inside a kitchen base cabinet
next to my saw. The back of the cabinet is open and pulled away from the wall about 2 inches. I run the vac hose out of the side of the cabinet. I did it this way more because it got the shopvac out of the way. It cuts down on the noise too but now I'm going to pay more attention to how long I run it and how hot it gets. I really like the shopvac air cleaner you posted. I'm going to put that on my "things to get list" lol

I think we can safely say it's not worth the risk to put the shop vac in an enclosure and use it to collect dust from the scroll saw. We use the scroll saw for extended periods and that sounds like a bad idea. It even sounds like using a non-industrial shop vac to collect dust from a scroll saw is a bad idea even sitting in the open.

I think we are left with a couple options. Use a dust collection system instead of a shop vac or let the dust fall and clean up after.

I plan to use the ShopVac air cleaner to collect the airborne dust and just clean the floor and bottom of the scroll saw as time permits. I am personally more concerned with breathing the dust than getting the floor dirty so I can live with this option.

Don't forget to wear your dust mask. I highly recommend the Dust-Be-Gone mask. It is by far the most comfortable mask to wear and it is the first I have used that won't fog my glasses. They are expensive but in my opinion worth every penny.

Monday, January 10, 2011

Shop Vac Silencer?

After I posted the video the other night showing my scroll saw dust collection system I receive several email about the noise of the shop vac. That has always been my biggest issue with trying to use dust collection with a scroll saw. You run a scroll saw for extended periods of time and it gets very uncomfortable listening to the noise.

I have searched for a quieter shop vac but have not found one that's good enough. One of the members in the Community Forum pointed out these three videos showing the construction of a shop vac silencer box.

To me this looks like a possibility but I have some reservations about heat build up. For normal clean up I think there would not be a problem but for extended cutting I wonder how hot the unit would get.

I would like to hear from some industry people what they think about using this type of system for long sessions. If you have built a similar system and are currently using if for scroll saw dust collection email me with your opinions.






This is the end of the daily posts. Keep scrolling for lot's more scrolls saw fun!






https://www.bearwood.com/
Bear Woods has been around since 1987 serving our hobby. They offer a wide range of craft products including Pegas scroll saw blades, clock inserts, toy parts, workshop supplies and much more. In my ten years of writing the Scrollsaw Workshop blog I have never received a complaint about Bear Woods. I get thousands of email a month so that's saying something about their customer service and quality products. Please support the people who support our hobby. Click now and visit Bear Woods.

Heritage Wood Specialties. Scroll saw ready boards!


Heritage Wood Specialties is a nationally recognized supplier of superior quality hardwoods to fine woodworkers across the US and Canada. Novice hobbyists and experienced enthusiasts alike can enjoy the high quality woodworking materials and kits available from Heritage Wood Specialties. Great source for scroll saw ready boards.

Seyco

http://seyco.com/
Seyco began business in 1986 with the goal to supply the best customer support and quality products in the scroll saw industry. I have worked with Seyco on many occasions and I can tell you they are simply the best. Please do yourself a favor and click the image above. Steve Good

Free Pattern Catalog. 1000's of free patterns.

http://www.stevedgood.com/catalog/

Thousands of FREE scroll saw patterns. No registration or signup required.

The projects form these patterns can be sold without restrictions. The patterns cannot be sold.

Click here for the Free Online Catalog.

-

Wooden Vases on the Scroll Saw Book $12 Each

http://www.stevedgood.com/woodenvases.html
Each digital book is available for download immediately after payment.
The books are $12 per edition and contains eight unique patterns each.
Watch the following video to see how easy these beautiful scroll saw vases
are to make. 

Order the $3 pdf Catalog

This is a PDF of all the patterns in my free catalog. It is for Windows only and has a program to automatically download the pattern to your computer. Please watch the video below before you order. Click the picture to order.
http://www.stevedgood.com/swpd/swpdorderpage.html
You do not need a PayPal account to order. At the bottom of the PayPal page is a button that will allow you to pay with a credit card. After successful payment click the Return to Merchant button for the download.

Stencil Printer 1.7

Stencil Printer Instruction Video.

The Scrollsaw Workshop Stencil Printer 1.7 is my latest software for creating patterns. It will create key chain fobs, desk name plates and more. Click the image above to download the latest version. It is free to use donationware. This software is for Windows PC only.

Scroll Saw Pattern Printer update 1.1

Scroll Saw Pattern Printer update 1.1
Download the Free Scroll Saw Pattern Printer Version 1.1. Create name patterns in seconds. Windows PC only.
Download Version 1.1
Please consider a $5 donation for The Scroll Saw Pattern Printer v1.1.

Scroll Saw Keychain Pattern Maker

Use the Scroll Saw Keychain Maker to start a small keychain business. Build yourself a nice display and make up severl keychains with common names. Sell at craft shows, on Ebay or at work. Everyone needs a keychain. Take custom orders. Heck just make them and give them away as gifts. It's all made easy with the Scroll Saw Keychain Maker. Watch the video demonstration then download the file below and get started with the fun.
The following link will start the download process. After the file download is complete just click the setup file and the program will be installed. Please consider a $5 donation for the program.

Download the Oval Keychain Pattern Maker.

Enjoy designing and printing these great personalized key chains. Give them as gifts, make them for fun or sell them at craft shows. It's easy, just watch the video demo then download and install the program. You will be designing these fun projects in minutes. Windows PC only.
Download the Free Oval Key Chain Pattern Maker. Create Oval key chain patterns in seconds.
Download Version .9a
Please consider a $5 donation for The Oval Key Chain Pattern Maker.

T-Shirts and More.

T-Shirts and More.
Show your love for the hobby and support the Scrollsaw Workshop. Safe and secure order fullfilled by CafePress. Take a look. You are sure to find something you like. CLICK THE IMAGE to visit the store.

The Lifter

Papa's Custom Patterns.

www.papasworkshop.net

Philip Lowndes Noah's Arc Pattern Available. Watch the video below.

This video is from Philip Lowndes. He is the designer of this beautiful Noah's Arc puzzle pattern. If you would like the pattern follow the link below.
Buy This Wonderful Heirloom Puzzle Pattern

Think Safety

Remember to keep the safety of yourself and others in your work shop in your thoughts at all times. Always wear eye and ear protection. Follow all the manufactures warnings that came with your power tools. If I demonstrate something on this web site that you don't feel is safe, don't do it. Your safety is your responsibility. Fingers are handy things, try to keep all of them.
__________________________
Disclaimer:
The Scrollsaw Workshop Blog is in no way affiliated with or sponsored by Scroll Saw Woodworking and Crafts Magazine formerly (Scroll Saw Workshop Magazine) or it's publisher Fox Chapel Publishing.

Scroll Saw Woodworking and Crafts