Tuesday, April 30, 2013

Wooden Mother's Day Card.

This wooden Mother's Day card is 5 X 7. Give your mother this hand made card on her special day.           

The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated. Make A Donation


If you are reading this in the email newsletter please visit the blog for more content. All previous patterns are saved in the free online catalog. Free software, videos, Community forum and more.

Scrollsaw Workshop Blog

Sunday, April 28, 2013

Country legend George Jones passed away April 26, 2013. He was 81 years old. George was considered one of the finest country singers of all time. He had many country number one hits including, "He Stopped Loving Her Today".


The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated. Make A Donation


If you are reading this in the email newsletter please visit the blog for more content. All previous patterns are saved in the free online catalog. Free software, videos, Community forum and more.

Scrollsaw Workshop Blog

Mini-Grandfather Clock Scroll Saw Pattern.


This Mini-Grandfather Clock is 19 inches tall. It uses a 2 3/4" clock insert with a 2 3/8" diameter mounting hole. The fretwork is beginner level work. The three sections are just box construction. There are four dividers that are all the same size. The box sections are glued to the dividers then stacked and glued. The ornament fretwork pieces are glued to the front of the three sections.  

Make sure you study the pictures in the pattern book before you begin. Build the clock in sections then stack the sections together. All the sections and dividers are flush to the back of the clock. Carefully center all the sections.

You can easily build this clock in a weekend. I spent around five hours cutting, assembling and finishing the clock.

 
The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated. Make A Donation


If you are reading this in the email newsletter please visit the blog for more content. All previous patterns are saved in the free online catalog. Free software, videos, Community forum and more.

Scrollsaw Workshop Blog

Thursday, April 25, 2013

Bless Our Family Scroll Saw Pattern.


This word art pattern is over 26 inches long. It is 6 inches tall at the peak. It is designed in 3 sections to be easy to cut even on small saws. It should be cut from 3/4" thick wood.


The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated. Make A Donation


If you are reading this in the email newsletter please visit the blog for more content. All previous patterns are saved in the free online catalog. Free software, videos, Community forum and more.

Scrollsaw Workshop Blog

Tuesday, April 23, 2013

Bass Fishing Fanatic Scroll Saw Pattern.


 It's time to hit the lakes. This pattern will look great in any fisherman's den.

Time for my regular apology. I'm sorry I don't answer all my email. I just get more than time allows for me to answer. I read to as many as I can. I try to answer questions from new scrollers first. Right now there are 668 unanswered emails in my inbox. I feel bad I can't be more helpful. I look forward to the day when I retire from my day job. I would love to do this full time.
 

The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated. Make A Donation


If you are reading this in the email newsletter please visit the blog for more content. All previous patterns are saved in the free online catalog. Free software, videos, Community forum and more.

Scrollsaw Workshop Blog

Sunday, April 21, 2013

Shark! Scroll Saw Pattern.

-
The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated. Make A Donation


If you are reading this in the email newsletter please visit the blog for more content. All previous patterns are saved in the free online catalog. Free software, videos, Community forum and more.

Scrollsaw Workshop Blog

Thursday, April 18, 2013

Teddy Bear Letters.

Each Teddy bear is a little under 5 inches tall. Cut your child's or grand child's name. Put them on the mantle or let the child play with them to help learn to spell their name. Cut them from 3/4" thick wood. Make sure you do a good job of sanding the edges of all the pieces.


The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated. Make A Donation


If you are reading this in the email newsletter please visit the blog for more content. All previous patterns are saved in the free online catalog. Free software, videos, Community forum and more.

Scrollsaw Workshop Blog

Wednesday, April 17, 2013

Lizard Egg Scroll Saw Pattern.

 
Create one of a kind jig saw puzzles. Imagine how thrilled they will be when you create a hand cut wooden jigsaw puzzle of their photograph. Wedding and anniversary photos, birthday or special occasion. Click the image below to view a video demonstration. If you like what you see then  purchase the pattern book for $7.

 
This is a photo of the 4X6 24 piece puzzle.
The book has templates up to 8X10 320 piece puzzles.
 
The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated. Make A Donation


If you are reading this in the email newsletter please visit the blog for more content. All previous patterns are saved in the free online catalog. Free software, videos, Community forum and more.

Scrollsaw Workshop Blog

Monday, April 15, 2013

Let's Go Racing! Custom Flag Patterns.

I know many of you are race fans. I get email from you guys all the time.  My wife and most of her family are big race fans. Her uncle was a NASCAR driver in the 60's. His name was Earl Balmer. Earl had a reputation of being a lead footed driver. He would push the car hard into the corner. So hard that he often did not come out of the corner. He did have one Sprint Cup Series victory in a qualifier at Daytona in 1966. A few of the drivers behind Earl in his victory were, Ned Jarrett, David Pearson, A.J. Foyt, Mario Andretti and Bobby Allison. Here is a link to the race results for his victory.

Earl left a passion for the sport with many of the Balmer family.  I wife seldom misses a televised race.

Earl Balmer
 
The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated. Make A Donation


If you are reading this in the email newsletter please visit the blog for more content. All previous patterns are saved in the free online catalog. Free software, videos, Community forum and more.

Scrollsaw Workshop Blog

Friday, April 12, 2013

Smile, it confuses people.


The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated. Make A Donation


If you are reading this in the email newsletter please visit the blog for more content. All previous patterns are saved in the free online catalog. Free software, videos, Community forum and more.

Scrollsaw Workshop Blog

Signature Card Font Trouble.

I had a few emails from readers saying that the font in the signature card I posted yesterday did not render correctly.  With version 19 of the Firefox browser they included a built in PDF viewer. This built in viewer is not rendering all documents the same as Adobe Acrobat reader. The font is embedded in the PDF. The browsers built in viewer is just not rendering it correctly. If you are trying to open my patterns with a third party PDF viewer you may have trouble.  This may include more that the Firefox built in viewer. I have not tested Foxit PDF viewer or any of the others yet.

I'll spend some time this weekend trying to figure out where the incompatibility is and try to work around it for future patterns. In the mean time if you don't wish to use the Adobe reader then the image above is a high resolution JPG that should print pretty well from any imaging software. You will need to adjust the size before you print.

GEEK ALERT:
For those of you using the new version of Firefox you can disable the built in PDF viewer. On the about:config page just set the pdfjs.disabled pref to true and it will not use the built in viewer. The about:config page has critical preferences and you can kill Firefox if you make changes you shouldn't. For that reason make these changes at your own risk.If there is enough interest I'll do a short video showing how to disable it.

When the Firefox browser opens the PDF in the built in viewer is also open a dialog box at the top of the browser asking if you wish to use a different viewer. This works but seem to default back to the built in viewer after a few documents are opened.


Thursday, April 11, 2013

Signature Cards.


If you have craft shows planned for this coming summer these signature cards may come in handy. The cards are 2.5 X 1.5 inches. I left plenty of room for a signature and edition number. Just print as many as you need on nice quality card stock.

If you take this or any of my patterns to a commercial printer I want to point out the print permission on the cover. Sometimes printer employees want proof of permission to use before they will print a document. I print this permission on the bottom of each pattern I send out.  This should be enough to allow them to make as many prints as you need. 

Just a reminder that I have my patterns DVD for sale.

This DVD contains all the patterns from the Scrollsaw Workshop blog from May 12, 2007 to December 2, 2012. There are 1113 pattern books many with multiple patterns. These are the patterns that are available in the free online catalog. This DVD is for those who wish to have all the patterns and don't wish to try and download hundreds of patterns. Use the DVD for club meetings, sharing with friends and customers, Archiving etc.Just click the image below to go to the order page.

 
The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated. Make A Donation


If you are reading this in the email newsletter please visit the blog for more content. All previous patterns are saved in the free online catalog. Free software, videos, Community forum and more.

Scrollsaw Workshop Blog

Tuesday, April 9, 2013

Louisville Cardinals, 2013 NCAA Basketball Champs.

Congratulations to the 2013 NCAA basketball national champion Louisville Cardinals. The cards beat the Michigan Wolverines 82 to 76 in a great final game of the season. The game had everything a championship game should have. Michigan may have come out on the short end of the score but they have nothing to hang their head about. 

 The game was fun to watch from the opening tip. I have seen too many slow down boring championship games. This one was anything but boring. Both teams took it to each other.

The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated. Make A Donation


If you are reading this in the email newsletter please visit the blog for more content. All previous patterns are saved in the free online catalog. Free software, videos, Community forum and more.

Scrollsaw Workshop Blog

Monday, April 8, 2013

Dog and Cat Portrait.

I like the cat I drew for yesterday's pattern. I decided to draw a dog in the same style. They go pretty good together don't you think.

The NEOS Scroll Saw and Woodworking picnic is almost here. They need a favor. If you plan to attend please consider an advanced reservation. The funds from the reservations are critical to cover the advanced expenses of the show. They will be extending the deadline for advanced reservations so please visit the site and make reservations.  http://northeasternohioscrollers.yolasite.com/




The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated. Make A Donation


If you are reading this in the email newsletter please visit the blog for more content. All previous patterns are saved in the free online catalog. Free software, videos, Community forum and more.

Scrollsaw Workshop Blog

Sunday, April 7, 2013

Cat Sign.

For the cat lovers out there.  


The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated. Make A Donation


If you are reading this in the email newsletter please visit the blog for more content. All previous patterns are saved in the free online catalog. Free software, videos, Community forum and more.

Scrollsaw Workshop Blog

Saturday, April 6, 2013

Offer from BigFoot Products

Here is a special offer from BigFoot Products. Click the picture for more details.

Basketball !

This pattern is a large multilayer basketball plaque. The NCAA final four is this weekend. Congratulations to Wichita St, Louisville, Syracuse and Michigan. I will be watching every minute of the action. Unfortunately my Kentucky Wildcats are not there this year but another in state school, Louisville is. The Cards are strong, quick and athletic. They face the Wichita St. team that no one thought would be in the final four. Should be fin to watch these two go at it.

Syracuse and Michigan are both playing great ball right now. Michigan is much better that I though they would be. Syracuse has a great coach and a defense that drives other teams crazy. I have no idea who wins that game but I'll be watching to find out.

I plan to make a few small changes to the blog this weekend. I'm going to take down a couple features. I just can't keep up with everything right now because we are so busy at my day job lately. I have neglected the Custom Pattern Store and fallen so far behind that's it's just not fair to ask people to wait so long for the patterns. I'm going to take it down at least temporarily. If my spare time gets better I may put it back up later. I will try to fill all the current orders but I will not be taking new orders.

I also plan to remove the reader photo section. I don't like the gallery software I use and it needs to be replaced. I will keep all the photos and add them to the new gallery when I find one that is not so buggy. There is also a gallery inside the Community Forum. I may just use that and not have a gallery outside of the forum. Still trying to decide which options are best.

Sorry if the changes cause anyone a problem.
 
The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated. Make A Donation


If you are reading this in the email newsletter please visit the blog for more content. All previous patterns are saved in the free online catalog. Free software, videos, Community forum and more.

Scrollsaw Workshop Blog

Wednesday, April 3, 2013

Let's make some toast.


Here is a project you can make in just a few minutes and everyone will want one. Toaster tongs are a handy tool to have. Keep your fingers away from the burners and off the hot toast.

You want to use a nice straight grained wood. Make sure the grain runs the length of the tongs. The tongs and the pivot are cut from separate pieces to keep the grain straight while allowing the splayed design. I used cherry and they feel very durable.

The places where you have to glue the tongs to the pivot need to be flat to allow a good glue surface. Take you time when you cut this area. I cut the long tongs on the table saw and just cut the other pieces on the scroll saw.

After the glue dries blend the pieces together by sanding. 

I just used an oil to finish the project. 
 

The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated. Make A Donation


If you are reading this in the email newsletter please visit the blog for more content. All previous patterns are saved in the free online catalog. Free software, videos, Community forum and more.

Scrollsaw Workshop Blog

Tuesday, April 2, 2013

Paw Jewelry Scroll Saw Pattern.

This is a simple little project for the animal lovers. These little wooden heart pendants are cut from 1/8" thick contrasting woods. Alternatively you can use one of the inlay materials like Inlace or polymer clay to fill the paw cutout. I have shown both of these inlay techniques on the blog before. They are easy and look great. Just enter inlace in the search box on the blog to find more information on inlay with Inlace.  


The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this link. Your support is greatly appreciated. Make A Donation


If you are reading this in the email newsletter please visit the blog for more content. All previous patterns are saved in the free online catalog. Free software, videos, Community forum and more.

Scrollsaw Workshop Blog

This is the end of the daily posts. Keep scrolling for lot's more scrolls saw fun!






https://www.bearwood.com/
Bear Woods has been around since 1987 serving our hobby. They offer a wide range of craft products including Pegas scroll saw blades, clock inserts, toy parts, workshop supplies and much more. In my ten years of writing the Scrollsaw Workshop blog I have never received a complaint about Bear Woods. I get thousands of email a month so that's saying something about their customer service and quality products. Please support the people who support our hobby. Click now and visit Bear Woods.

Heritage Wood Specialties. Scroll saw ready boards!


Heritage Wood Specialties is a nationally recognized supplier of superior quality hardwoods to fine woodworkers across the US and Canada. Novice hobbyists and experienced enthusiasts alike can enjoy the high quality woodworking materials and kits available from Heritage Wood Specialties. Great source for scroll saw ready boards.

Seyco

http://seyco.com/
Seyco began business in 1986 with the goal to supply the best customer support and quality products in the scroll saw industry. I have worked with Seyco on many occasions and I can tell you they are simply the best. Please do yourself a favor and click the image above. Steve Good

Free Pattern Catalog. 1000's of free patterns.

http://www.stevedgood.com/catalog/

Thousands of FREE scroll saw patterns. No registration or signup required.

The projects form these patterns can be sold without restrictions. The patterns cannot be sold.

Click here for the Free Online Catalog.

-

Wooden Vases on the Scroll Saw Book $12 Each

http://www.stevedgood.com/woodenvases.html
Each digital book is available for download immediately after payment.
The books are $12 per edition and contains eight unique patterns each.
Watch the following video to see how easy these beautiful scroll saw vases
are to make. 

Order the $3 pdf Catalog

This is a PDF of all the patterns in my free catalog. It is for Windows only and has a program to automatically download the pattern to your computer. Please watch the video below before you order. Click the picture to order.
http://www.stevedgood.com/swpd/swpdorderpage.html
You do not need a PayPal account to order. At the bottom of the PayPal page is a button that will allow you to pay with a credit card. After successful payment click the Return to Merchant button for the download.

Stencil Printer 1.7

Stencil Printer Instruction Video.

The Scrollsaw Workshop Stencil Printer 1.7 is my latest software for creating patterns. It will create key chain fobs, desk name plates and more. Click the image above to download the latest version. It is free to use donationware. This software is for Windows PC only.

Scroll Saw Pattern Printer update 1.1

Scroll Saw Pattern Printer update 1.1
Download the Free Scroll Saw Pattern Printer Version 1.1. Create name patterns in seconds. Windows PC only.
Download Version 1.1
Please consider a $5 donation for The Scroll Saw Pattern Printer v1.1.

Scroll Saw Keychain Pattern Maker

Use the Scroll Saw Keychain Maker to start a small keychain business. Build yourself a nice display and make up severl keychains with common names. Sell at craft shows, on Ebay or at work. Everyone needs a keychain. Take custom orders. Heck just make them and give them away as gifts. It's all made easy with the Scroll Saw Keychain Maker. Watch the video demonstration then download the file below and get started with the fun.
The following link will start the download process. After the file download is complete just click the setup file and the program will be installed. Please consider a $5 donation for the program.

Download the Oval Keychain Pattern Maker.

Enjoy designing and printing these great personalized key chains. Give them as gifts, make them for fun or sell them at craft shows. It's easy, just watch the video demo then download and install the program. You will be designing these fun projects in minutes. Windows PC only.
Download the Free Oval Key Chain Pattern Maker. Create Oval key chain patterns in seconds.
Download Version .9a
Please consider a $5 donation for The Oval Key Chain Pattern Maker.

T-Shirts and More.

T-Shirts and More.
Show your love for the hobby and support the Scrollsaw Workshop. Safe and secure order fullfilled by CafePress. Take a look. You are sure to find something you like. CLICK THE IMAGE to visit the store.

The Lifter

Papa's Custom Patterns.

www.papasworkshop.net

Philip Lowndes Noah's Arc Pattern Available. Watch the video below.

This video is from Philip Lowndes. He is the designer of this beautiful Noah's Arc puzzle pattern. If you would like the pattern follow the link below.
Buy This Wonderful Heirloom Puzzle Pattern

Think Safety

Remember to keep the safety of yourself and others in your work shop in your thoughts at all times. Always wear eye and ear protection. Follow all the manufactures warnings that came with your power tools. If I demonstrate something on this web site that you don't feel is safe, don't do it. Your safety is your responsibility. Fingers are handy things, try to keep all of them.
__________________________
Disclaimer:
The Scrollsaw Workshop Blog is in no way affiliated with or sponsored by Scroll Saw Woodworking and Crafts Magazine formerly (Scroll Saw Workshop Magazine) or it's publisher Fox Chapel Publishing.

Scroll Saw Woodworking and Crafts