Tuesday, February 7, 2017

Eiffel Tower Clock Scroll Saw Pattern. More info on the copper jewelry project.

http://www.stevedgood.com/estore/estore.html
This Eiffel Tower clock is 25 inches tall. It took around six to seven hours to cut. I worked on it a little yesterday and finished today. The clock insert is a 2 3/4" from Bear Woods. The clock is made from maple. I used the 1/2" X 12" X 16" Scroll Saw Plank from Heritage Wood Specialties. The base is Bubinga also from Heritage. 

I used a Pegas modified geometer #3 blade from Bear Woods. I used a relatively small blade because of all the small angle turns. I did not want to back out of every turn so the small blade allowed me to make the very tight turns. I did still have to back out of many of the turns to get a sharp point but it still saved me some time. If I were making this as a show piece and not a demo I would backed out of every turn to get sharp points.
The clock is cut in three separate sections then glued together. The glue joints need to be flat so the pieces make good contact. If you cut these sections with your scroll saw you will probably have to sand them flat. Place sand paper on a flat surface and carefully sand flat. Test fit the pices to make sure they make good contact.

You will notice in the picture that the bottom is different than the final pattern. I used dowels to secure the clock to the bubinga base. I added tabs to the final pattern.

The top section is almost 16 inches tall. There was not a good place to break this part of the pattern in half so I left it that tall. This is a bit of a challenge to cut. When you are cutting the far ends you will be some distance away for the blade. Take your time. Sometimes cutting long pieces is easier if you stand up.

_______________

Information:
I just wanted to update you on the copper jewelry project I mentioned last week. I received a ton of email saying you wanted to try this project. It is coming along well. I received the new batch of jewelers blades today and made this copper name bracelet. I still plan to take orders for custom name patterns for a few of the pieces. 

The blades we will be using are the jewelers blades sold at www.mikesworkshop.com. I spoke with them and they have a good supply on hand. I will be using the J #3/0, J #1 and the J #3 blades. If you think you will be wanting to give this a try head over there and order a few of each. They are $3 a dozen. Don't be surprised if they run out though. There are a lot of you who will be buying them. 

Keep in mind that these are very fine blades and wear out much faster than normal scroll saw blades. If funds are tight just order the J #3 but order at least three dozen. The bracelet above took two blades. 

Most of the jewelry will be made from copper pipe. A few of the pieces like this copper bracelet will be cut from 1" X 6" copper bracelet blanks. These blanks are $3 each on Amazon but you have to buy a set of 10. You won't need to buy these unless you plan to make the bracelets. Still at $3 per bracelet that's a nice cheap project.

I also ordered a 6" X 6" sheet of 18 gauge copper. I wanted to have this in case you were not interested in using the copper pipe. The pipe does take a little hand strength to open and flatten. I am trying to come up with a technique to make it easier.

Another supply that you will need is 1/8" Baltic birch plywood. This will be sacrificial to protect the copper and table while cutting. Stay tuned coming soon. 

_______________


- -


Purchase the entire Scrollsaw Workshop pattern catalog for offline access.
This DVD has 1,964 patterns published from 2007 thru 2016.
The DVD is $20 plus shipping. Ships to 60 countries around the world.

You can view a video showing use of the DVD on a Windows PC and a MAC at this link

Click here to Order. 
Want to create beautiful wooden vases on the scroll saw?
My two "Wooden Vases on the Scroll Saw" books make it easy.

The books are $12 each and available for instant download after purchase. Click for Video Demonstration.


The Scrollsaw Workshop is primarily supported by donations. If you enjoy this Blog and would like to make a donation please click this Button. Your support is greatly appreciated. 
http://www.stevedgood.com/donate2.html

Ad: Affiliate

Ryoba 9-1/2" Double Edge Razor Saw


I love my Japanese razor saw. Must have in my shop


This is the end of the daily posts. Keep scrolling for lot's more scrolls saw fun!






https://www.bearwood.com/
Bear Woods has been around since 1987 serving our hobby. They offer a wide range of craft products including Pegas scroll saw blades, clock inserts, toy parts, workshop supplies and much more. In my ten years of writing the Scrollsaw Workshop blog I have never received a complaint about Bear Woods. I get thousands of email a month so that's saying something about their customer service and quality products. Please support the people who support our hobby. Click now and visit Bear Woods.

Heritage Wood Specialties. Scroll saw ready boards!


Heritage Wood Specialties is a nationally recognized supplier of superior quality hardwoods to fine woodworkers across the US and Canada. Novice hobbyists and experienced enthusiasts alike can enjoy the high quality woodworking materials and kits available from Heritage Wood Specialties. Great source for scroll saw ready boards.

Seyco

http://seyco.com/
Seyco began business in 1986 with the goal to supply the best customer support and quality products in the scroll saw industry. I have worked with Seyco on many occasions and I can tell you they are simply the best. Please do yourself a favor and click the image above. Steve Good

Free Pattern Catalog. 1000's of free patterns.

http://www.stevedgood.com/catalog/

Thousands of FREE scroll saw patterns. No registration or signup required.

The projects form these patterns can be sold without restrictions. The patterns cannot be sold.

Click here for the Free Online Catalog.

-

Wooden Vases on the Scroll Saw Book $12 Each

http://www.stevedgood.com/woodenvases.html
Each digital book is available for download immediately after payment.
The books are $12 per edition and contains eight unique patterns each.
Watch the following video to see how easy these beautiful scroll saw vases
are to make. 

Order the $3 pdf Catalog

This is a PDF of all the patterns in my free catalog. It is for Windows only and has a program to automatically download the pattern to your computer. Please watch the video below before you order. Click the picture to order.
http://www.stevedgood.com/swpd/swpdorderpage.html
You do not need a PayPal account to order. At the bottom of the PayPal page is a button that will allow you to pay with a credit card. After successful payment click the Return to Merchant button for the download.

Stencil Printer 1.7

Stencil Printer Instruction Video.

The Scrollsaw Workshop Stencil Printer 1.7 is my latest software for creating patterns. It will create key chain fobs, desk name plates and more. Click the image above to download the latest version. It is free to use donationware. This software is for Windows PC only.

Scroll Saw Pattern Printer update 1.1

Scroll Saw Pattern Printer update 1.1
Download the Free Scroll Saw Pattern Printer Version 1.1. Create name patterns in seconds. Windows PC only.
Download Version 1.1
Please consider a $5 donation for The Scroll Saw Pattern Printer v1.1.

Scroll Saw Keychain Pattern Maker

Use the Scroll Saw Keychain Maker to start a small keychain business. Build yourself a nice display and make up severl keychains with common names. Sell at craft shows, on Ebay or at work. Everyone needs a keychain. Take custom orders. Heck just make them and give them away as gifts. It's all made easy with the Scroll Saw Keychain Maker. Watch the video demonstration then download the file below and get started with the fun.
The following link will start the download process. After the file download is complete just click the setup file and the program will be installed. Please consider a $5 donation for the program.

Download the Oval Keychain Pattern Maker.

Enjoy designing and printing these great personalized key chains. Give them as gifts, make them for fun or sell them at craft shows. It's easy, just watch the video demo then download and install the program. You will be designing these fun projects in minutes. Windows PC only.
Download the Free Oval Key Chain Pattern Maker. Create Oval key chain patterns in seconds.
Download Version .9a
Please consider a $5 donation for The Oval Key Chain Pattern Maker.

T-Shirts and More.

T-Shirts and More.
Show your love for the hobby and support the Scrollsaw Workshop. Safe and secure order fullfilled by CafePress. Take a look. You are sure to find something you like. CLICK THE IMAGE to visit the store.

The Lifter

Papa's Custom Patterns.

www.papasworkshop.net

Philip Lowndes Noah's Arc Pattern Available. Watch the video below.

This video is from Philip Lowndes. He is the designer of this beautiful Noah's Arc puzzle pattern. If you would like the pattern follow the link below.
Buy This Wonderful Heirloom Puzzle Pattern

Think Safety

Remember to keep the safety of yourself and others in your work shop in your thoughts at all times. Always wear eye and ear protection. Follow all the manufactures warnings that came with your power tools. If I demonstrate something on this web site that you don't feel is safe, don't do it. Your safety is your responsibility. Fingers are handy things, try to keep all of them.
__________________________
Disclaimer:
The Scrollsaw Workshop Blog is in no way affiliated with or sponsored by Scroll Saw Woodworking and Crafts Magazine formerly (Scroll Saw Workshop Magazine) or it's publisher Fox Chapel Publishing.

Scroll Saw Woodworking and Crafts